AMERICAN FLAGPOLE EXPERTS / LIGHTING
PoleLED
Flagpole Lighting.
Bring your flag into the light.
A circular LED fixture around the flagpole directs light upward toward the flag. Explore Basic, Extended, and O² to find the right fit.
O² / PRODUCT DETAIL
PoleLED O2 shown. Compare all three models below.
01 / THE POLELED RANGE
Three models.
One focused approach.
Compare output and pole diameter first, then review the full specifications and fit guide for your project.
02 / EXTENDED
3,250
LUMENS
38W · Up to 5″ pole diameter
03 / BASIC
2,300
LUMENS
24W · Up to 4″ pole diameter
02 / MODEL SPECIFICATIONS
The details.
Side by side.
Compare the dimensions, output, cable length, and other specifications across the three models.
| Specification | O² | Extended | Basic |
|---|---|---|---|
| Wattage | 81W | 38W | 24W |
| Light output | 9,500 lumens | 3,250 lumens | 2,300 lumens |
| CREE LEDs | 28 pcs | 10 pcs | 12 pcs |
| Fits pole diameter | Up to 9″ | Up to 5″ | Up to 4″ |
| Cable length | 33 ft | 33 ft | 23 ft |
| Size (W × H) | 14 × 12.5 in | 10.2 × 8.3 in | 9.1 × 7.1 in |
| Weight | 22 lbs | 13.2 lbs | 7.7 lbs |
| Warranty | 5 years | 5 years | 5 years |
SHARED ACROSS THE RANGE
Built around
the light.
Review the electrical, optical, and finish information below when specifying your fixture.
Electrical & optical specifications
24V DC · 3000K, 4000K, or 5000K · 11° beam angle · 50,000+ hour lifespan.
Construction & ratings
Aluminum construction · UL-listed (E466441) · IP65.
Finish options
Available in Satin/Grey, Black, or White. Custom colors are available upon request.
03 / FIT GUIDE
Start at
the base.
Your flagpole’s butt diameter is its width at the base. Use that measurement to narrow down the compatible PoleLED models.
Up to 4″ butt diameter
Basic, Extended, or O² may fit. Select the model based on your pole dimensions and lighting needs.
Over 4″ and up to 5″
Compare Extended and O².
Over 5″ and up to 9″
O² is the model to review for this diameter range.
A 10″ pole or an uncertain measurement?
The O² can accommodate some poles up to 10″ depending on flag size and the specific configuration. Send your pole details so we can confirm fit before ordering.
04 / TECHNICAL RESOURCES
From selection
to submittal.
Request model-specific cut sheets, dimensional drawings, and installation information for Basic, Extended, or O².
YOUR PROJECT / OUR EXPERTISE
Find your
PoleLED.
Send your pole model, height, butt diameter, flag size, preferred finish, and available power. We’ll help confirm the model and provide pricing.